I worked yesterday and today to get it out, my son Daniel helped today.
Eds truck
Re: Eds truck
Nice Ed... first build post!
-
Big Ed
- No limits
- Posts: 245
- Joined: Thu Jan 19, 2017 8:01 pm
- Location: Fresno, CA
- Vehicle(s): C1300 and 1110D
Re: Eds truck
You know me, always working on something.
I was already planning on rebuilding it because it had lost a lot of power, then it conked out and had to be towed home. I plan on taking it apart enough to see if it's rebuildable.
I was already planning on rebuilding it because it had lost a lot of power, then it conked out and had to be towed home. I plan on taking it apart enough to see if it's rebuildable.
Last edited by Big Ed on Thu Jan 26, 2017 9:03 pm, edited 1 time in total.
64 C1300 4X4, 345, T34, T18, NP202, D70F with ARB & 35 spline Chromoly axles, RA15 with Detroit Locker, 41" Iroks, front & rear PTO winches, recent makeover.
-
fpscabs
- No limits
- Posts: 206
- Joined: Mon Jan 16, 2017 9:45 pm
- Location: Glendora, CA
- Vehicle(s): 1970 Travelall
Re: Eds truck
anything special planned?
Fritz...
Past President, Main Chapter
OHV 167v SBNF
KJ6RUN
Certifications:
First Aid, Chainsaw, 4x4, ATV,
1970 Travelall, 392 1100D
Past President, Main Chapter
OHV 167v SBNF
KJ6RUN
Certifications:
First Aid, Chainsaw, 4x4, ATV,
1970 Travelall, 392 1100D
-
Wmontaney
- Three-quarter tank
- Posts: 76
- Joined: Sun Jan 22, 2017 3:23 pm
- Location: San Diego
- Vehicle(s): 1978 SSII
- Contact:
Re: Eds truck
Looking forward to following.
Are you going to go in depth on what you do to the engine?
Are you going to go in depth on what you do to the engine?
Bill--
San Diego Chapter
KJ6WJL
1978 SSII
San Diego Chapter
KJ6WJL
1978 SSII
-
Big Ed
- No limits
- Posts: 245
- Joined: Thu Jan 19, 2017 8:01 pm
- Location: Fresno, CA
- Vehicle(s): C1300 and 1110D
Re: Eds truck
No.fpscabs wrote:anything special planned?
64 C1300 4X4, 345, T34, T18, NP202, D70F with ARB & 35 spline Chromoly axles, RA15 with Detroit Locker, 41" Iroks, front & rear PTO winches, recent makeover.
-
Big Ed
- No limits
- Posts: 245
- Joined: Thu Jan 19, 2017 8:01 pm
- Location: Fresno, CA
- Vehicle(s): C1300 and 1110D
Re: Eds truck
Likely yes.Wmontaney wrote:Looking forward to following.
Are you going to go in depth on what you do to the engine?
Took it apart more today, nothing obviously wrong yet.
64 C1300 4X4, 345, T34, T18, NP202, D70F with ARB & 35 spline Chromoly axles, RA15 with Detroit Locker, 41" Iroks, front & rear PTO winches, recent makeover.
-
Big Ed
- No limits
- Posts: 245
- Joined: Thu Jan 19, 2017 8:01 pm
- Location: Fresno, CA
- Vehicle(s): C1300 and 1110D
Re: Eds truck
Number 1 and 2 connecting rods are broken, one bolt came loose and backed all the way off, then the other bolt broke. Once that one was loose, it tore up the other connecting rod. I already took it to the rebuilder. I hope the block is still usable, otherwise I need to tear down another engine and see if the block is good. This block hasn't been bored over, I like that.
64 C1300 4X4, 345, T34, T18, NP202, D70F with ARB & 35 spline Chromoly axles, RA15 with Detroit Locker, 41" Iroks, front & rear PTO winches, recent makeover.
-
Big Ed
- No limits
- Posts: 245
- Joined: Thu Jan 19, 2017 8:01 pm
- Location: Fresno, CA
- Vehicle(s): C1300 and 1110D
Re: Eds truck
64 C1300 4X4, 345, T34, T18, NP202, D70F with ARB & 35 spline Chromoly axles, RA15 with Detroit Locker, 41" Iroks, front & rear PTO winches, recent makeover.
-
Desert Scout
- Full Tank
- Posts: 127
- Joined: Tue Jan 24, 2017 4:15 pm
- Vehicle(s): 63 & 64 S80 4x4
Re: Eds truck
These ol things are pretty tough, hopefully the block is good.
Chuck & Ruthie
WN7CHK & KJ6RTJ
58 A-120 4x4 (in progress)
87 HD FLHTP
2011 Ranger S/C
1990 F350 Lariat S/C Dually
2007 Tiffin Allegro 30DA Moho
WN7CHK & KJ6RTJ
58 A-120 4x4 (in progress)
87 HD FLHTP
2011 Ranger S/C
1990 F350 Lariat S/C Dually
2007 Tiffin Allegro 30DA Moho