- 20180328_170759(0).jpg (4.93 MiB) Viewed 4305 times
- 20180325_125937.jpg (5.17 MiB) Viewed 4305 times
- 20180325_131519.jpg (5.46 MiB) Viewed 4305 times
What is a reasonable price?
-
sleeper454
- Newbie
- Posts: 1
- Joined: Wed Aug 08, 2018 10:38 am
- Vehicle(s): 1980 Scout II Turbi Diesel
What is a reasonable price?
I currently have a 1980 Scout II turbo diesel for Speed Dana's front and rear what the 2 inch lift everything is completely stock on it and I just replaced calipers rotors bearings brake pads rear shoes rear wheel cylinders front rear brake lines did all the maintenance as far as fluids. Wanted to see if I can talk to somebody about an appraisal to see what it's worth it runs great just need to focus my attention on other projects I have. I'm new to this site and just need some Direction possibly someone but I could forward some pictures and get a ballpark of price. Thanks in advance. Here is a couple pictures of the outside I'll update the inside and motor on a day I can take some pictures
Last edited by sleeper454 on Wed Sep 19, 2018 2:55 pm, edited 2 times in total.
-
Wmontaney
- Three-quarter tank
- Posts: 76
- Joined: Sun Jan 22, 2017 3:23 pm
- Location: San Diego
- Vehicle(s): 1978 SSII
- Contact:
Re: What is a reasonable price?
It is worth what the buyer is willing to pay.
From your description and lack of photos to judge body, paint, interior, engine, frame, etc..... and if I was in the market, I would offer you $5000.
From your description and lack of photos to judge body, paint, interior, engine, frame, etc..... and if I was in the market, I would offer you $5000.
Bill--
San Diego Chapter
KJ6WJL
1978 SSII
San Diego Chapter
KJ6WJL
1978 SSII
-
Big Ed
- No limits
- Posts: 245
- Joined: Thu Jan 19, 2017 8:01 pm
- Location: Fresno, CA
- Vehicle(s): C1300 and 1110D
Re: What is a reasonable price?
Post pictures.
64 C1300 4X4, 345, T34, T18, NP202, D70F with ARB & 35 spline Chromoly axles, RA15 with Detroit Locker, 41" Iroks, front & rear PTO winches, recent makeover.