If you are planning to attend the work day and meeting and Tom's on Feb 22 please post here what you want worked on so we have an idea of what to expect and everyone is prepared.
Address: Tom's House 2550 Cliff rd. Upland CA https://goo.gl/maps/ambrWdADRif1a1RL6
MEETING AND WORK DAY FEB 22
-
ShaunT
- Full Tank
- Posts: 110
- Joined: Fri Jan 20, 2017 6:15 pm
- Location: Orange County, CA
- Vehicle(s): 74 Scout II. Orange Crush
MEETING AND WORK DAY FEB 22
Last edited by ShaunT on Wed Feb 12, 2020 8:44 am, edited 1 time in total.
-
ShaunT
- Full Tank
- Posts: 110
- Joined: Fri Jan 20, 2017 6:15 pm
- Location: Orange County, CA
- Vehicle(s): 74 Scout II. Orange Crush
Re: MEETING AND WORK DAY FEB 22
Per Tom Maricella's scout "Norburg" will need the following looked at on the work day:
brakes I hear something rear There are a set rare shoes inside the back
left hub won’t turn right hub is tight
F R spring broken clamp
Needs rear seat mounting plates
Door locks won’t stay up
Needs a steering stabilizer
Sometimes it won’t start and park
Holes in the floor pan
brakes I hear something rear There are a set rare shoes inside the back
left hub won’t turn right hub is tight
F R spring broken clamp
Needs rear seat mounting plates
Door locks won’t stay up
Needs a steering stabilizer
Sometimes it won’t start and park
Holes in the floor pan
-
ShaunT
- Full Tank
- Posts: 110
- Joined: Fri Jan 20, 2017 6:15 pm
- Location: Orange County, CA
- Vehicle(s): 74 Scout II. Orange Crush
Re: MEETING AND WORK DAY FEB 22
My scout...
I have a dent on the driver side behind the rear wheel I need to hammer back in shape
get my license place lights working
I have a dent on the driver side behind the rear wheel I need to hammer back in shape
get my license place lights working
-
Big John
- No limits
- Posts: 244
- Joined: Wed Jan 25, 2017 8:13 pm
- Vehicle(s): 73 Scout 11 4X4, 71, 72, 73 Traveletes all 4X4's 3 IH Garands, IH refrierator And?
Re: MEETING AND WORK DAY FEB 22
Address please.
-
ShaunT
- Full Tank
- Posts: 110
- Joined: Fri Jan 20, 2017 6:15 pm
- Location: Orange County, CA
- Vehicle(s): 74 Scout II. Orange Crush
Re: MEETING AND WORK DAY FEB 22
Tom's House 2550 Cliff rd. Upland CA https://goo.gl/maps/ambrWdADRif1a1RL6
-
Tim Potter
- Quarter-tank
- Posts: 26
- Joined: Tue Feb 14, 2017 5:35 pm
Re: MEETING AND WORK DAY FEB 22
whats a FR spring clamp?ShaunT wrote: Sun Feb 09, 2020 4:40 pm Per Tom Maricella's scout "Norburg" will need the following looked at on the work day:
brakes I hear something rear There are a set rare shoes inside the back
left hub won’t turn right hub is tight
F R spring broken clamp
Needs rear seat mounting plates
Door locks won’t stay up
Needs a steering stabilizer
Sometimes it won’t start and park
Holes in the floor pan
does she have a stabilizer?
not starting in park may be because the trans isnt actually in park. cable adjustment maybe.
holes in floor pan are the least of the rust problems she has. body mounts are completely rusted out. if the holes are too breezy, a couple tubes of RTV can seal 'em up for short term, but the truck needs major surgery.
-
WILD BILL
- Newbie
- Posts: 1
- Joined: Thu Feb 13, 2020 7:32 pm
- Vehicle(s): 1977 scout 2 w/360 mopar swap
Re: MEETING AND WORK DAY FEB 22
Hello all I'm the new guy, wondering if it will be OK to meet up with some of you at this Saturdays work day in the afternoon. Very interested in joining even though my scout needs a little more TLC & parts before it hits the road. I did meet up with one of the members at Farmer Boys in Riverside back in Oct. Hoping to see you this Sat.
-
ShaunT
- Full Tank
- Posts: 110
- Joined: Fri Jan 20, 2017 6:15 pm
- Location: Orange County, CA
- Vehicle(s): 74 Scout II. Orange Crush
Re: MEETING AND WORK DAY FEB 22
Yes Bill come on by and hang out with us... looking forward to meeting you
-
Tiki800
- Newbie
- Posts: 3
- Joined: Wed Feb 19, 2020 8:49 am
- Location: Upland
- Vehicle(s): 1968 scout 800
Re: MEETING AND WORK DAY FEB 22
I live in upland! Would like to stop by and say hello. Need a trailer to bring my basket case with me. Currently dealing with removing the original spring bushing sleeves from the frame mounts, not going well.
Re: MEETING AND WORK DAY FEB 22
What time are ya going to get going?