Eds truck
-
Big Ed
- No limits
- Posts: 245
- Joined: Thu Jan 19, 2017 8:01 pm
- Location: Fresno, CA
- Vehicle(s): C1300 and 1110D
Re: Eds truck
Using the truck on a local trail. The big log didn't get cleared completely on the opening, me and my son Daniel took care of it Saturday.
- Attachments
-
- IMG_3275.JPG (3.65 MiB) Viewed 9208 times
-
- IMG_3264.JPG (3.9 MiB) Viewed 9208 times
64 C1300 4X4, 345, T34, T18, NP202, D70F with ARB & 35 spline Chromoly axles, RA15 with Detroit Locker, 41" Iroks, front & rear PTO winches, recent makeover.
-
Big Ed
- No limits
- Posts: 245
- Joined: Thu Jan 19, 2017 8:01 pm
- Location: Fresno, CA
- Vehicle(s): C1300 and 1110D
Re: Eds truck
Yesterday morning these fly fishermen showed up at our camp by the lake, the driver apparently didn't see the ledge, went right off it and onto the boulders. Doh!
https://www.youtube.com/watch?v=8nujsUiM5nY&t=201s
https://www.youtube.com/watch?v=8nujsUiM5nY&t=201s
- Attachments
-
- IMG_3701.JPG (3 MiB) Viewed 9187 times
-
- IMG_3700.JPG (3 MiB) Viewed 9187 times
-
- IMG_3699.JPG (2.96 MiB) Viewed 9187 times
64 C1300 4X4, 345, T34, T18, NP202, D70F with ARB & 35 spline Chromoly axles, RA15 with Detroit Locker, 41" Iroks, front & rear PTO winches, recent makeover.
-
Big Ed
- No limits
- Posts: 245
- Joined: Thu Jan 19, 2017 8:01 pm
- Location: Fresno, CA
- Vehicle(s): C1300 and 1110D
Re: Eds truck
Lost compression on number seven cylinder. With valves closed I blew air into the cylinder, it came out the exhaust. I don't know why an exhaust valve would fail so soon. I've been in communication with the rebuilder, he said to pull the head and bring it down.
64 C1300 4X4, 345, T34, T18, NP202, D70F with ARB & 35 spline Chromoly axles, RA15 with Detroit Locker, 41" Iroks, front & rear PTO winches, recent makeover.
-
Desert Scout
- Full Tank
- Posts: 127
- Joined: Tue Jan 24, 2017 4:15 pm
- Vehicle(s): 63 & 64 S80 4x4
Re: Eds truck
sounds like a pita
Chuck & Ruthie
WN7CHK & KJ6RTJ
58 A-120 4x4 (in progress)
87 HD FLHTP
2011 Ranger S/C
1990 F350 Lariat S/C Dually
2007 Tiffin Allegro 30DA Moho
WN7CHK & KJ6RTJ
58 A-120 4x4 (in progress)
87 HD FLHTP
2011 Ranger S/C
1990 F350 Lariat S/C Dually
2007 Tiffin Allegro 30DA Moho
-
Big Ed
- No limits
- Posts: 245
- Joined: Thu Jan 19, 2017 8:01 pm
- Location: Fresno, CA
- Vehicle(s): C1300 and 1110D
Re: Eds truck
Yes, I just went through this....
Got the head off and headed to the shop.
Got the head off and headed to the shop.
64 C1300 4X4, 345, T34, T18, NP202, D70F with ARB & 35 spline Chromoly axles, RA15 with Detroit Locker, 41" Iroks, front & rear PTO winches, recent makeover.
-
Big Ed
- No limits
- Posts: 245
- Joined: Thu Jan 19, 2017 8:01 pm
- Location: Fresno, CA
- Vehicle(s): C1300 and 1110D
Re: Eds truck
Broken valve spring. Already replaced, need to put head back on.
64 C1300 4X4, 345, T34, T18, NP202, D70F with ARB & 35 spline Chromoly axles, RA15 with Detroit Locker, 41" Iroks, front & rear PTO winches, recent makeover.
-
Desert Scout
- Full Tank
- Posts: 127
- Joined: Tue Jan 24, 2017 4:15 pm
- Vehicle(s): 63 & 64 S80 4x4
Re: Eds truck
Was it new?Big Ed wrote: Fri Oct 27, 2017 4:10 pm Broken valve spring. Already replaced, need to put head back on.
Chuck & Ruthie
WN7CHK & KJ6RTJ
58 A-120 4x4 (in progress)
87 HD FLHTP
2011 Ranger S/C
1990 F350 Lariat S/C Dually
2007 Tiffin Allegro 30DA Moho
WN7CHK & KJ6RTJ
58 A-120 4x4 (in progress)
87 HD FLHTP
2011 Ranger S/C
1990 F350 Lariat S/C Dually
2007 Tiffin Allegro 30DA Moho
-
Big Ed
- No limits
- Posts: 245
- Joined: Thu Jan 19, 2017 8:01 pm
- Location: Fresno, CA
- Vehicle(s): C1300 and 1110D
Re: Eds truck
I don't think so. I thought an overhaul would have included new valve springs, but the rebuilder saId if they're good they reuse them. Doh! Now I'm tempted to get all new ones and replace them. If I caught it before hand it could have been replaced without removing the head, by putting air into the spark plug hole to keep the valve up.
Head and rocker assembly is back on, and surface valley pan goes against is cleaned up. Will do more tomorrow.
Head and rocker assembly is back on, and surface valley pan goes against is cleaned up. Will do more tomorrow.
64 C1300 4X4, 345, T34, T18, NP202, D70F with ARB & 35 spline Chromoly axles, RA15 with Detroit Locker, 41" Iroks, front & rear PTO winches, recent makeover.
-
Desert Scout
- Full Tank
- Posts: 127
- Joined: Tue Jan 24, 2017 4:15 pm
- Vehicle(s): 63 & 64 S80 4x4
Re: Eds truck
I've heard that chevy BB springs will work and are much cheaper
Chuck & Ruthie
WN7CHK & KJ6RTJ
58 A-120 4x4 (in progress)
87 HD FLHTP
2011 Ranger S/C
1990 F350 Lariat S/C Dually
2007 Tiffin Allegro 30DA Moho
WN7CHK & KJ6RTJ
58 A-120 4x4 (in progress)
87 HD FLHTP
2011 Ranger S/C
1990 F350 Lariat S/C Dually
2007 Tiffin Allegro 30DA Moho
-
Big Ed
- No limits
- Posts: 245
- Joined: Thu Jan 19, 2017 8:01 pm
- Location: Fresno, CA
- Vehicle(s): C1300 and 1110D
Re: Eds truck
Hmmmm.
Intake, exhaust, and valve cover are back on. Not much more now.
Intake, exhaust, and valve cover are back on. Not much more now.
64 C1300 4X4, 345, T34, T18, NP202, D70F with ARB & 35 spline Chromoly axles, RA15 with Detroit Locker, 41" Iroks, front & rear PTO winches, recent makeover.